LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Engine Coolant Thermostat >> Installation >> 2.8L Diesel Engine

2.8L Diesel Engine

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean old gasket material from cylinder head and thermostat housing.
  2. Install thermostat housing with gasket and support bracket (2.8L) to cylinder head. See Figure. Torque bolts to 27.5N.m.
  3. Connect coolant bypass hose and upper radiator hose to thermostat housing.
  4. Refill cooling system. (Refer to COOLANT  ).
  5. Install engine cover. (Refer to ENGINE COVER - INSTALLATION) .
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals