LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Engine Coolant Temperature Sensor >> Installation >> 2.8L Diesel Engine

2.8L Diesel Engine

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install coolant temperature sensor in thermostat housing. See Figure.
  2. Connect coolant temperature sensor electrical connector.
  3. Refill cooling system. (Refer to COOLANT  )
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals