LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Engine Coolant Temperature Sensor >> Installation >> 2.4L Engine

2.4L Engine

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply thread sealant to sensor threads.
  2. Install sensor to engine.
  3. Tighten sensor to 11 N.m (8 ft. lbs.) torque.
  4. Replace any lost engine coolant.
scientia non olet · About LEMON Manuals