LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Engine Block Heater >> Removal >> Removal - 2.4L

Removal - 2.4L

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain cooling system. (Refer to ENGINE  ).
  2. Raise vehicle on hoist.
  3. Detach power cord plug from heater.
  4. Loosen screw in center of heater. Remove heater assembly.
scientia non olet · About LEMON Manuals