LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Coolant Recovery Container >> Installation >> Pressure System - 3.7L/2.8L Diesel

Pressure System - 3.7L/2.8L Diesel

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position pressure bottle on mounting bracket.
  2. Install mounting nuts. Tighten nuts to 8.5 N.m (75 in. lbs.).
  3. Install lower hose at coolant bottle.
  4. Install radiator to coolant bottle hose at coolant bottle.
  5. Fill cooling system (Refer to COOLING - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals