LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> Coolant Recovery Container >> Installation >> Non-Pressure System - 2.4L

Non-Pressure System - 2.4L

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect coolant bottle to radiator hose to the bottom of coolant bottle.
  2. Position coolant bottle on mounting bracket.
  3. Install mounting nuts. Tighten to 8.5 N.m (75 in. lbs.).
  4. Fill cooling system (Refer to COOLING - STANDARD PROCEDURE) 

.

scientia non olet · About LEMON Manuals