Section 495 (Engine Cooling System & Automatic Transmission Cooling System): Cooling: Specifications: Torque
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Engine Air Tubes | |||
| Turbocharger to Intercooler | 4.7 | - | 42 |
| Intercooler to Intake Manifold | 4.7 | - | 42 |
| Automatic Belt Tensioner to Mounting Bracket | - | - | - |
| 2.4L | 41 | 30 | - |
| 3.7L | 41 | 30 | - |
| Automatic Belt Tensioner Pulley Bolt | |||
| 2.4L | 61 | 45 | - |
| 3.7L | 61 | 45 | - |
| Accessory Drive Belt Idler Pulley Bolt - 2.8L Diesel | 53 | 39 | - |
| Accessory Drive Belt Tensioner Bolt - 2.8L Diesel | 47.1 | 35 | - |
| Viscous Fan Drive to Engine - 3.7L | 95 | 70 | - |
| Viscous Fan Drive to Engine - 2.8L Diesel | 149 | 110 | - |
| Cooling Fan Support Bolts | 47.1 | 35 | - |
| Block Heater Bolt | |||
| 2.4L | 2 | - | 17 |
| 3.7L | 2 | - | 17 |
| Transmission Oil/Condenser to Radiator Bolts | 11.9 | - | 105 |
| Coolant Overflow Bottle to Plenum mounting bolts - 2.4L only | 8.5 | - | 75 |
| Coolant Pressure Bottle to Plenum mounting bolts -3.7L only | 8.5 | - | 75 |
| Electric Fan to Fan Shroud bolts | 9 | - | 80 |
| Fan Blade Assy. to Viscous Drive Bolts - 3.7L/2.8L HD Cooling | 23.7 | - | 210 |
| Fan Shroud to Radiator Mounting Bolts | 9 | - | 80 |
| Radiator Upper Isolator to Crossmember - Bolts | 10.7 | - | 95 |
| Thermostat Housing Bolts | - | - | - |
| 2.8L Diesel | 27.5 | 21 | - |
| 2.4L | 28 | - | 250 |
| 3.7L | 13 | - | 115 |
| Water Pump Bolts | |||
| 2.4L | 12 | - | 105 |
| 3.7L | 24 | 18 | - |
| Water Pump Housing Nuts - 2.8L Diesel | 24.4 | 18 | - |