Idler Pulley: Removal
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
The retaining bolts on the idler pulleys are left hand thread.
- Disconnect negative battery cable.
- Remove accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
- Remove idler pulley retaining bolts and pulleys. See Fig 1 and Fig 2.
| 1 - IDLER PULLEY |
| 2 - COOLING FAN SUPPORT |
| 3 - RETAINING BOLTS |
| 4 - ENGINE LIFT HOOK |
| 1 - VIBRATION DAMPER/CRANKSHAFT PULLEY RETAINING BOLTS |
| 2 - VIBRATION DAMPER/CRANKSHAFT PULLEY |
| 3 - IDLER PULLEY |