LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Cooling System & Automatic Transmission Cooling System) >> Accessory Drive >> Idler Pulley >> Installation >> 2.8L Diesel

2.8L Diesel

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install idler pulleys and retaining bolts. See Figure and Figure. Torque bolts to 53N.m.
  2. Install accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
  3. Connect negative battery cable.
scientia non olet · About LEMON Manuals