2.8L Diesel

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable.

Remove accessory drive belt. See Fig 1 (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .

Fig 1: Accessory Belt Routing

Courtesy of DAIMLERCHRYSLER CORP.

1 - IDLER PULLEY

2 - GENERATOR

3 - IDLER PULLEY

4 - A/C COMPRESSOR

5 - COOLING FAN SUPPORT

6 - VIBRATION DAMPER

7 - BELT TENSIONER

8 - POWER STEERING PUMP

9 - ACCESSORY DRIVE BELT

10 - VISCOUS HEATER

Remove belt tensioner retaining bolt and remove tensioner from bracket. See Fig 2.

Fig 2: Belt Tensioner Assembly

Courtesy of DAIMLERCHRYSLER CORP.

1 - ACCESSORY BELT TENSIONER RETAINING BOLT

2 - POWER STEERING PUMP PULLEY

3 - BELT TENSIONER

4 - BRACKET

5 - POWER STEERING PUMP

6 - POWER STEERING PUMP RETAINING BOLTS

7 - POWER STEERING PUMP PULLEY RETAINING BOLTS