LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 (Differential & Driveline) >> Propeller Shaft >> Shaft-Propeller Front >> Installation >> 2.8L Diesel

2.8L Diesel

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install propeller shaft between companion flanges.
  2. Align marks on the companion flanges with the marks on the C/V joints.
  3. Install front C/V joint bolts and tighten to 30 N.m (22 ft. lbs.).
  4. Install rear C/V joint bolts and tighten to 30 N.m (22 ft. lbs.).
  5. Install exhaust flange and bolts.
scientia non olet · About LEMON Manuals