Seal-Axle Shaft: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: SEAL INSTALLER

Courtesy of DAIMLERCHRYSLER CORP.

1 - INSTALLER 8806

2 - HANDLE C-4171

Apply a light coat of lubricant on the lip of the shaft seal.
Install new shaft seal with Installer 8806 (2) and Handle C-4171(1). See Fig 1.
Install right axle shaft if removed.
Install half shaft.