DRBIII® Error Messages And Blank Screen: Notes
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Under normal operation, the DRBIII® will display one of only two error messages:
- User-Requested WARM Boot or User-Requested COLD Boot
If the DRBIII® should display any other error message, record the entire display and call the STAR Center. This is a sample of such an error message display.
- User-Requested WARM Boot by pressing MORE and NO at the same time.
ver: 2.29
date: 1 Oct 93
file: key_itf.cc
date: Jan 12 1994
line: 544
err: 0x1
User-Requested WARM Boot
Press MORE to switch between this display and the application screen.
Press F4 when done noting information.
or User-Requested COLD Boot by pressing MORE and YES at the same time.
ver: 2.29
date: 1 Oct 99
file: keyhndi.cc
date: Mar 8 2000
line: 1297
err: 0x1
User-Requested COLD Boot
Press MORE to switch between this display and the application screen.
Press F4 when done noting information.