LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Windshield Wiper & Washer >> Symptom: WIPER MODE SWITCH CIRCUIT HIGH >> When Monitored and Set Condition: >> Wiper Mode Switch Circuit High

Wiper Mode Switch Circuit High

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: With the ignition on.

Set Condition: BCM detects a voltage greater than 4.75 volts on the Wiper Mode Switch Input for more than 5 seconds.

scientia non olet · About LEMON Manuals