LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Windshield Wiper & Washer >> Symptom: WIPER HIGH/LOW RELAY OUTPUT CIRCUIT HIGH >> When Monitored and Set Condition: >> Wiper High/Low Relay Output Circuit High

Wiper High/Low Relay Output Circuit High

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: With ignition on.

Set Condition: BCM detects a high level on the Wiper High/Low relay output when it is attempting to turn the wipers on for more than 5 seconds.

scientia non olet · About LEMON Manuals