LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Overhead Console >> Symptom: NO BCM MESSAGES RECEIVED >> When Monitored and Set Condition: >> No BCM Messages Received

No BCM Messages Received

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: When the ignition is turned on.

Set Condition: No PCI Bus message received for 5 seconds after the ignition is turned on. No PCI Bus message is indicated by dashes in the VF display. When valid data is received, the data will replace the dashes.

scientia non olet · About LEMON Manuals