Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE - TIRE SIZE NOT PROGRAMMED
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | With the DRBIII® in Body Computer, select Miscellaneous, then select Program Tire Size. Program the appropriate tire size. With the DRBIII®, erase DTCs. Turn the ignition off, wait 15 seconds, then turn the ignition on. With the DRBIII®, read DTCs. Did this DTC reset? Yes --> Replace and program the Body Control Module in accordance with the Service Information. Perform BODY VERIFICATION TEST - VER 1 . No --> Test Complete. |
All |