LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: INTERNAL MODULE FAILURE >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE - INTERNAL MODULE FAILURE

TEST ACTION APPLICABILITY
1 With the DRBIII®, erase DTCs.
Turn the ignition off, wait 10 seconds, then turn the ignition on.
With the DRBIII®, read DTCs.
When this code is set, the Instrument Cluster must be replaced.
Yes --> Replace the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1  .
No --> Test Complete.		 All
scientia non olet · About LEMON Manuals