LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: *SEAT BELT INDICATOR ALWAYS ON >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE - SEAT BELT INDICATOR ALWAYS ON

TEST ACTION APPLICABILITY
1 Turn the ignition on.
Ensure that the seat belt buckles are not damaged and are buckled.
With the DRBIII® select MIC, in Inputs/Outputs, read the Seatbelt Lamp state.
Does the DRBIII® display "On"?
Yes --> Refer to SEAT BELT SYMPTOM(S)  in the Airbag category.
No --> Replace and configure the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1  .		 All
scientia non olet · About LEMON Manuals