Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE - TAILGATE AJAR CIRCUIT SHORTED TO GROUND
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Disconnect the Tailgate Lock Motor/Ajar Switch harness connector. With the DRBIII® in Inputs/Outputs, read the TAILGATE AJAR SW state. Does the DRBIII® display CLOSED? Yes --> Go To 2 No --> Replace the Tailgate Ajar Switch. Perform BODY VERIFICATION TEST - VER 1 . |
All |
| 2 | Disconnect the Tailgate Lock Motor/Ajar Switch harness connector. Disconnect the BCM C1 harness connector. Using a 12-volt test light connected to 12-volts, probe the Sense circuit and test for a short to ground. Does the test light illuminate? Yes --> Repair the Tailgate Ajar Switch Sense circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1 . No --> Replace the Body Control Module. Perform BODY VERIFICATION TEST - VER 1 . |
All |