LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Communication >> Symptom: ITM MESSAGES NOT RECEIVED >> When Monitored and Set Condition: >> ITM Messages Not Received

ITM Messages Not Received

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: With the ignition in run, and the IOD fuse installed.

Set Condition: The BCM does not receive any messages from the Intrusion Transceiver Module (ITM) for at least 30 seconds.

scientia non olet · About LEMON Manuals