LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 491 (Body Diagnostic Procedures) >> Diagnostic Information And Procedures >> Airbag >> Symptom: SQUIB CONFIGURATION >> When Monitored and Set Condition: >> Squib Configuration

Squib Configuration

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: With ignition on and the ACM not configured for side airbags. The ACM monitors the unused side airbag squib terminals for a valid squib circuit resistance.

Set Condition: The DTC will set if the vehicle is equipped with side airbags and ACM detects a valid squib circuit resistance across the unused terminals.

scientia non olet · About LEMON Manuals