LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 490 (Powertrain Diagnostic Procedures - Diesel) >> Diagnostic Information And Procedures >> DRIVEABILITY - Diesel - Diagnostic Tests >> P1101-ACM Crash Signal Received >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURES - P1101-ACM CRASH SIGNAL RECEIVED

TEST ACTION APPLICABILITY
1
NOTE: This DTC indicates that the vehicle safety system has deployed the airbag(s).
Turn the ignition on.With the DRBIII®, erase ECM DTCs.
NOTE: If this DTC sets again inspect the ACM Signal circuit between the ECM harness connector and the ACM harness connector for an intermittent short to ground.
View repair.Yes --> Test complete.Perform ROAD TEST VERIFICATION - VER-2 .		 All
scientia non olet · About LEMON Manuals