DRBIII® Error Messages And Blank Screen: Notes
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Under normal operation, the DRBIII® will display one of only two error messages:
- User-Requested WARM Boot or User-Requested COLD Boot.
If the DRBIII® should display any other error message, record the entire display and call the STAR Center. This is a sample of such an error message display:
ver: 2.14
date: 26 Jul93
file: key_itf.cc
date: Jul 26 1993
line: 548
err. 0x1
User-Requested COLD boot
Press MORE to switch between this display and the application screen.
Press F4 when done noting information.