Rear Header Trim: Removal

Remove the wiper motor cover and disconnect the wiper motor electrical connector and washer hose. See Fig 1.

Fig 1: REAR WIPER MOTOR TRIM COVER REMOVE/INSTALL

Courtesy of DAIMLERCHRYSLER CORP.

1 - SCREW (3)

2 - TRIM COVER

3 - ELECTRICAL & WASHER HOSE CONNECTIONS

4 - WIPER MOTOR

5 - LIFTGATE GLASS

Using a trim stick C-4755 or equivalent, separate the header trim and retainer clips from the top. See Fig 2.
Pull the wire harnesses and washer hose through the trim panel and remove.

Fig 2: REAR HEADER TRIM

Courtesy of DAIMLERCHRYSLER CORP.

1 - REAR HEADER TRIM

2 - WIRE OPENINGS (2)