Fuel Delivery - 2.4L/3.7L Gas: Description
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
The fuel delivery system consists of:
- the fuel pump module containing the electric fuel pump, fuel pressure regulator, fuel gauge sending unit (fuel level sensor) and a fuel filter
- fuel tubes/lines/hoses
- quick-connect fittings
- fuel injector rail
- fuel tank
- fuel tank filler/vent tube assembly
- fuel tank filler tube cap
- accelerator pedal
- throttle cable
| 1 - FUEL PUMP MODULE LOCK RING | 4 - EVAP CANISTER |
| 2 - FUEL PUMP MODULE | 5 - NVLD PUMP |
| 3 - ISOLATOR SLEEVE | 6 - FUEL TANK |
| 1 - FUEL TANK | 10 - FUEL TANK STRAPS |
| 2 - FUEL PUMP MODULE LOCK RING | 11 - HEAT SHIELD |
| 3 - FUEL PUMP MODULE ASSEMBLY | 12 - CHECK (CONTROL) VALVE |
| 4 - FLOW MANAGEMENT VALVE | - |
| 5 - FUEL FILL TUBE | - |
| 6 - FRESH AIR TUBE | - |
| 7 - FUEL FILL HOSE | - |
| 8 - FRESH AIR FILTER | - |
| 9 - NVLD PUMP |