LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 513 (Diagnosis & Overhaul - NV231 & NV241 Genii Transfer Case) >> Transfer Case - NV241 Genii >> Extension Housing Seal >> Removal

Extension Housing Seal: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle.
  2. Remove rear propeller shaft. (Refer to DIFFERENTIAL & DRIVELINE/PROPELLER SHAFT/PROPELLER SHAFT - REMOVAL)
  3. Using a suitable pry tool or slide-hammer mounted screw, remove the extension housing seal.
scientia non olet · About LEMON Manuals