LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 513 (Diagnosis & Overhaul - NV231 & NV241 Genii Transfer Case) >> Transfer Case - NV231 >> Transfer Case - NV231 >> Assembly >> MAINSHAFT

Transfer Case - NV231: Assembly: MAINSHAFT

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate mainshaft splines with recommended transmission fluid.
  2. Slide drive sprocket onto mainshaft.
  3. Slide mode hub onto mainshaft.
  4. Install mode hub retaining ring. Verify that the retaining ring is fully seated in mainshaft groove.
scientia non olet · About LEMON Manuals