Section 506 (Rack & Pinion Power Steering System): Pump: Pump: Installation: 2.8L-Diesel
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - HIGH PRESSURE HOSE |
| 2 - POWER STEERING PUMP |
| 3 - POWER STEERING PUMP MOUNTING BOLT |
| 4 - POWER STEERING PUMP PULLEY |
| 5 - POWER STEERING PUMP PULLEY MOUNTING BOLTS |
- Install the pump to the vehicle.
- Install the three bolts (3) securing the pump (2) to the bracket. See Fig 1.
- Install the power steering hoses (1). See Fig 1
- Install the three bolts (5) securing the pulley (4) to the pump (2). See Fig 1.
- Install the serpentine belt.
- Install the fan shroud
- Install the engine cooling fan.
- Refill the power steering fluid and check for leaks.