Adjustment - Lock Out
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - PARKING BRAKE HANDLE |
| 2 - PUNCH |
| 3 - CABLE GUIDE |
| 4 - CABLE |
NOTE:
The parking brake is self-adjusting, It can not be adjusted.
- Remove the center floor console (Refer to BODY/INTERIOR/FLOOR CONSOLE - REMOVAL) .
- Pull up on the spring until the tab on the lever passes the tab on the cable guide (3) and install a punch (2) in the hole on the side then release. See Fig 1.
- The park brake system is now locked out to perform necessary repairs.