Cluster Lens
- Disconnect and isolate the battery negative cable.
- Remove the instrument cluster from the instrument panel. (Refer to ELECTRICAL/INSTRUMENT CLUSTER - REMOVAL) .
- Work around the perimeter of the cluster lens and disengage each of the eight latches that secure the lens to the cluster mask and the cluster housing. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - REAR COVER |
| 2 - CLUSTER HOUSING |
| 3 - CLUSTER HOOD & MASK |
| 4 - CLUSTER LENS |
| 5 - SWITCH BUTTON BOOT |
- Gently pull the cluster lens away from the face of the instrument cluster.