LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler X, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Cluster >> Glove Box >> Disassembly - Glove Box >> Glove Box Latch & Handle

Glove Box Latch & Handle

  1. Disconnect and isolate the battery negative cable.
  2. Remove the glove box from the instrument panel. See REMOVAL  .
  3. Remove the four screws that secure the glove box latch and handle to the glove box door from the inside of the glove box.
  4. Remove the latch and handle from the inside of the glove box door.
scientia non olet · About LEMON Manuals