LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster >> Glove Box >> Assembly - Glove Box >> Glove Box latch & Handle

Glove Box latch & Handle

  1. Position the latch and handle onto the inside of the glove box door.
  2. Install and tighten the four screws that secure the glove box latch and handle to the glove box door from the inside of the glove box. Tighten the screws to 2 N.m (20 INCH lbs.).
  3. Reinstall the glove box onto the instrument panel. See INSTALLATION  .
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals