LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster >> Cluster Bezel >> Installation - Cluster Bezel

Installation - Cluster Bezel

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. SEE AIR BAG RESTRAINT SYSTEMS ARTICLE. THIS IS THE ONLY SURE WAY TO DISABLE THE AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
  1. Position the cluster bezel onto the instrument panel.
  2. Install and tighten the three screws that secure the upper mounting flange of the cluster bezel to the top of the instrument panel. Tighten the screws to 2 N.m (20 INCH lbs.).
  3. Install and tighten the screws that secure the lower mounting tabs of the cluster bezel to the instrument panel. Tighten the screws to 2 N.m (20 INCH lbs.).
  4. Reinstall the top cover onto the instrument panel. See TOP COVER  .
  5. Reinstall the steering column opening cover onto the instrument panel. See STEERING COLUMN article.
  6. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals