LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: CHECKSUM FAILURE >> Diagnostic Procedure

Diagnostic Procedure

CHECKSUM FAILURE - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII®, select Body, then Electro/Mech Cluster, read DTCs.
Does the DRBIII® display Checksum Failure?
  1. Yes : Replace and configure the Instrument Cluster in accordance with the Service Information.

    Perform BODY VERIFICATION TEST .

  2. No : Test Complete.
 All
scientia non olet · About LEMON Manuals