LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: *"NO BUS" IN VF DISPLAY >> Diagnostic Procedure

Diagnostic Procedure

"NO BUS" IN VF DISPLAY - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII®, select J1850 Module Scan.
Does the DRBIII® display MIC in the J1850 Module Scan?
  1. Yes : Replace the Instrument Cluster in accordance with the Service Information.

    Perform BODY VERIFICATION TEST .

  2. No : Refer to COMMUNICATION  and perform the appropriate symptom.

    Perform BODY VERIFICATION TEST .

 All
scientia non olet · About LEMON Manuals