Diagnostic Procedure
REAR WINDOW DEFOGGER SWITCH INDICATOR LAMP INOPERATIVE - DIAGNOSTIC PROCEDURE
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Inspect Fuse Block fuse #17. Is Fuse Block fuse #17 open?
|
All |
| 2 | Turn the ignition off. Disconnect the Rear Defogger Switch. Measure resistance of the Fused Rear Window Defogger Relay Output circuit to ground. Is the resistance below 5.0 ohms?
|
All |
| 3 | Turn the ignition off. Disconnect the Rear Defogger Switch. Remove the Rear Window Defogger Relay. Ensure that Fuse Block fuse #17 is installed. Measure resistance of the Fused Rear Window Defogger Relay Output circuit from the relay output terminal to the Defogger Switch connector. Is the resistance below 5.0 ohms?
|
All |