LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Chime >> Symptom: *CHIME INOPERATIVE WITH EXTERIOR LAMPS ON AND DRIVER DOOR OPEN >> Diagnostic Procedure

Diagnostic Procedure

CHIME INOPERATIVE WITH EXTERIOR LAMPS ON AND DRIVER DOOR OPEN - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1 Turn the ignition off.
Ensure the key is in the ignition switch all the way.
Open the driver door.
Does the chime sound?
  1. Yes : Go To 2
  2. No : Refer to Symptom: *CHIME INOPERATIVE WITH KEY IN IGNITION, DRIVER'S DOOR OPEN .

    Perform BODY VERIFICATION TEST .

All
2 Turn the ignition off.
Remove the Instrument Cluster From the I/P.
Turn the Exterior Lamps on.
Measure the voltage of the Headlamp Switch Output circuit in the Instrument Cluster C1 connector.
Is the voltage above 10.0 volts?
  1. Yes : If there are no possible causes remaining, replace the Instrument Cluster.

    Perform BODY VERIFICATION TEST .

  2. No : Repair the Headlamp Switch Output circuit for an open.

    Perform BODY VERIFICATION TEST .

All