LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Overhaul - NV231 Transfer Case) >> Transfer Case - NV231 >> Assembly >> MAINSHAFT

Transfer Case - NV231: Assembly: MAINSHAFT

WARNING: This page is about a different variant/trim than selected.
  1. Lubricate mainshaft splines with recommended transmission fluid.
  2. Slide drive sprocket onto mainshaft.
  3. Slide mode hub onto mainshaft.
  4. Install mode hub retaining ring. Verify that the retaining ring is fully seated in mainshaft groove.
scientia non olet · About LEMON Manuals