LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster >> Glove Box Latch Striker >> Installation - Glove Box Latch Striker

Installation - Glove Box Latch Striker

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. SEE AIR BAG RESTRAINT SYSTEMS ARTICLE. THIS IS THE ONLY SURE WAY TO DISABLE THE AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
  1. Position the latch striker onto the upper glove box opening reinforcement.
  2. Install and tighten the two screws that secure the latch striker to the upper glove box opening reinforcement. Tighten the screws to 2 N.m (20 INCH lbs.).
  3. Reinstall the glove box onto the instrument panel. See GLOVE BOX  .
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals