LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures >> Diagnostic Information And Procedures >> Instrument Cluster >> Symptom: *ABS INDICATOR INOPERATIVE >> Diagnostic Procedure

Diagnostic Procedure

ABS INDICATOR INOPERATIVE - DIAGNOSTIC PROCEDURE

TEST ACTION APPLICABILITY
1
NOTE: The Instrument Cluster ABS Indicator will not illuminate during the cluster Self Test. The indicator is controlled by PCI Bus messages received from the CAB.
NOTE: The CAB will command the ABS Indicator on when the ignition is cycled to the Run/Start position.
With the DRBIII®, read DTCs.Does the DRBIII® display any ABS DTCs?
  1. Yes : Refer to the BRAKES - ABS article and perform the appropriate symptom.

    Perform BODY VERIFICATION TEST .

  2. No : Replace the Instrument Cluster in accordance with the Service Information.

    Perform BODY VERIFICATION TEST .

All