LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Glove Box >> Disassembly >> Glove Box Latch And Handle

Glove Box Latch And Handle

  1. Disconnect and isolate the battery negative cable.
  2. Remove the glove box from the instrument panel. (Refer to GLOVE BOX - REMOVAL  ).
  3. Remove the four screws that secure the glove box latch and handle to the glove box door from the inside of the glove box.
  4. Remove the latch and handle from the inside of the glove box door.
scientia non olet · About LEMON Manuals