LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler X, Automatic >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Caliper & Brake Pads >> Installation

Rear Brake Caliper & Brake Pads: Installation

  1. To install, reverse removal procedure. Apply a light coat of multipurpose grease to caliper sliding surfaces. Lubricate bushings with silicone grease.
  2. Install caliper mounting bolts. Tighten to specification. See TORQUE SPECIFICATIONS  . Apply brakes until brake pedal is firm. Check brake fluid level.
scientia non olet · About LEMON Manuals