LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler X, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Glove Box >> Assembly >> Glove Box Latch And Handle

Glove Box Latch And Handle

  1. Position the latch and handle onto the inside of the glove box door.
  2. Install and tighten the four screws that secure the glove box latch and handle to the glove box door from the inside of the glove box. Tighten the screws to 2 N.m (20 in. lbs.).
  3. Reinstall the glove box onto the instrument panel. (Refer to GLOVE BOX - INSTALLATION  ).
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals