LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster >> Instrument Cluster >> Assembly >> Cluster Housing Rear Cover

Cluster Housing Rear Cover

  1. Position the cluster housing rear cover to the back of the instrument cluster housing.
  2. Press firmly and evenly on the cluster housing rear cover to install it onto the back of the instrument cluster housing.
  3. Work around the perimeter of the cluster housing rear cover making certain that each of the eight latches that secure the rear cover to the instrument cluster housing is fully engaged.
  4. Install and tighten the two screws that secures the rear cover to the instrument cluster housing adjacent to each cluster connector receptacle. Tighten the screws to 2 N.m (20 in. lbs.).
  5. Reinstall the instrument cluster onto the instrument panel. (Refer to INSTALLATION  ).
  6. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals