Axle Shaft Seals

AXLE SHAFT SEALS

REMOVAL
1. Raise and support vehicle.
2. Remove axle shafts.
3. Remove differential assembly.
4. Remove inner axle shaft seals with a pry bay.

INSTALLATION
1. Remove any sealer remaining from original seals.





2. Install oil seals with Discs 8110 and Turnbuckle 6797 (Fig. 22). Tighten tool until disc bottoms in housing.
3. Install differential and axle shafts.
4. Fill differential with lubricant.
5. Remove support and lower vehicle.