105000 MI or 168000 KM

Inspect
    Exhaust System
    Drive Belt
      Inspect the drive belt and replace as necessary. This maintenance is not required if the belt was previously replaced. Inspect the drive belt and replace as needed. Not required if the drive belt was previously replaced.
    Cooling System
      Inspect coolant level, hoses and clamps.
    Body and Frame
      After completion of 4WD operation, the underside of the vehicle should be thoroughly inspected. Examine threaded fasteners for looseness.
    Air Filter Element
      Inspect engine air filter element, replace if necessary.
Replace
    Oil Filter, Engine
    Engine Oil