P0108

Test 1 - 2:

Test 3 - 7:

SYMPTOM
P0108-MAP SENSOR VOLTAGE TOO HIGH

WHEN MONITORED
With the engine RPM above 400, the TPS voltage less than 1.13 volts, and battery voltage greater than 10.4 volts.

SET CONDITION
The MAP Sensor signal voltage is greater than 4.88 volts at start or with the engine running for 2.2 seconds.

POSSIBLE CAUSES
- MAP sensor voltage above 4.8 volts
- MAP sensor
- (K1) MAP sensor signal circuit shorted to voltage
- (K1) MAP sensor signal circuit open
- (K1) MAP sensor signal circuit shorted to (K7) 5 volt supply circuit
- (K4) sensor ground circuit open
- PCM