LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee 2WD V8-4.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Ball Joint >> Service and Repair >> Front Suspension >> Upper Ball Joint

Upper Ball Joint

UPPER BALL JOINT

REMOVAL
Ball stud service procedures below require removal of the hub bearing and axle shaft. Removal and installation of upper and lower ball studs require the use of Tool Kit 6289.





1. Position tools as shown to remove and install ball stud.
scientia non olet · About LEMON Manuals