Front Headrest Sleeve

FRONT HEADREST SLEEVE

REMOVAL

1. Remove head restraint.
2. Remove seat back cover.

Fig. 2:

3. Remove hog rings attaching cushion pad to seat back frame (Fig. 2).
4. Remove cushion pad from seat back frame.
5. Rotate head restraint sleeve 1/4 turn counterclockwise to release retaining tab.

Fig. 3:

6. Pull sleeve from seat back frame (Fig. 3).

INSTALLATION

1. Position sleeve in seat back frame.
2. Rotate head restraint sleeve 1/4 turn clockwise to engage retaining tab.
3. Install cushion pad onto seat back frame.
4. Install hog rings attaching cushion pad to seat back frame.
5. Install seat back cover.
6. Install head restraint.